Vulcan-Hart GRC 35 Especificaciones descargar pdf (Pagina 22)

– 22 –

OIL SHUTDOWN

The oil service has two modes:

Shutdown = ON - Counter with Shutoff

The operator sets the number of product cook cycles

before oil service action is taken by the controller.

After that number of cook cycles has elapsed, the

heat will be shut off, a SERVICE OIL message will be

flashed on the display, and the keypad will be locked

out. Turning the fryer off, then on, will clear the

condition and restore the count number set by COUNT

= XXX in the following section.

Shutdown = Off - Timer without Shutoff

The controller keeps track of the number of hours

since OIL TM = XXX HR was set by the operator.

When the time has elapsed, a small oil indicator light

will turn on. Service of the fryer is not interrupted. The

oil indicator remains lit until a time is re-entered for

OIL TM = XXX HR in the following section. Turning

the fryer off, then on, will clear the indicator.

DISPLAY INSTRUCTION

READY

Press 2 & 3 simultaneously.

-FUNCTIONS- Press ▼ .

EDIT PRODUCT Press

▼ .

SEL SETBACK Press

▼ .

CALIBRATE Press

▼ .

BOIL OUT Press

▼ .

RECOVERY Press

▼ .

SELECT MELT Press

▼ .

MANUAL SETUP Press

▼ .

OIL SHUTDOWN Press ENTER.

COUNT ON Press

▼ or ▲ to toggle.

COUNT OFF When OK, press EXIT.

OIL SHUTDOWN Press EXIT.

-FUNCTIONS- Press EXIT.

READY

OIL TMR/CNTR

The controller will alert the operator when the oil

needs to be changed. OIL TM = XXX sets the

number of hours before the alert will be given.

DISPLAY INSTRUCTION

READY Press 2 & 3 simultaneously.

-FUNCTIONS- Press

▼ .

EDIT PRODUCT Press

▼ .

SEL SETBACK Press

▼ .

CALIBRATE Press

▼ .

BOIL OUT Press

▼ .

RECOVERY Press

▼ .

SELECT MELT Press

▼ .

MANUAL SETUP Press

▼ .

OIL SHUTDOWN Press

▼ .

OIL TMR/CNTR Press ENTER.

OIL TM = XXX HR /

COUNT = XXX Use

▲ or ▼ to reset the

timer or counter. When set

time is OK, press EXIT.

OIL TMR/CNTR Press EXIT.

-FUNCTIONS- Press EXIT.

READY

If oil shutdown is OFF: The controller will alert the

operator when the oil needs to be changed. OIL TM

= XXX sets the number of hours before the alert will

be given.

If oil shutdown is ON: The controller will shut off the

heat, lock out the keypad, and signal to service the oil.

The fryer must be turned off to clear this condition.

COUNT = XXX sets the number of cook cycles before

shutoff. Turning the fryer off, then on, automatically

restores "COUNT = XXX" to the number originally set

by the operator.

1 2 ... 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios

Vulcan-Hart GRC 35 Especificaciones Pagina 22

Comentarios a estos manuales

Relacionado con productos y manuales para Freidoras Vulcan-Hart GRC 35