Vulcan-Hart GH30 Especificaciones descargar pdf (Pagina 15)

1. Close all front doors.

2. Press the upper half of the rocker switch to raise the braising pan and the lower half of the rocker

switch to lower the braising pan. The switch must be held for continuous raising or lowering of the

braising pan.

In case of power failure, the power lift system cannot be operated. Leave the braising pan in whatever

position it is in until the power is restored.

UNLOADING PREPARED FOODS

All braising pans are provided with a stationary support for holding a food receiving pan when unloading

prepared foods.

To install the support, hold the front end with two hands and hook the tabs onto pins in the braising pan

(Fig. 4). The support will accept food receiving pans of 12" x 20" up to 6" deep. Do not use pans greater

than 6" deep.

If your braising pan is equipped with the optional hinged food receiving pan support, the mechanism of the

support system will maintain the top edge of the receiving pan close (approximately 2") to the pouring lip.

To install and use this support, refer to Fig. 4 and follow instructions for installing the standard support

above.

Both types of pan supports can be easily removed when not needed, for example, when cleaning the

braising pan.

— 15—

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Sin comentarios

Vulcan-Hart GH30 Especificaciones Pagina 15