Vulcan-Hart GH30 Especificaciones descargar pdf (Pagina 14)

Do not overheat the clad stainless steel plate by setting the temperature well above recommended temperatures, or

by operating the braising pan without any fluid inside the pan to absorb heat. Overheating the plate may cause

warpage and will carbonize any cooking oil on the plate and cause sticking.

The lid is counterbalanced and will stay in any position at which it is placed. After some time, the counterbalancing

springs may need to be tightened. Call your local Vulcan-authorized servicer to make these adjustments.

OPERATION OF LIFTING SYSTEM

Keep the area underneath and around the braising pan clear of your hands or any other objects when operating the

lifting system.

Do not obstruct any of the moving parts of the lift system located underneath the table top on the right and/or left

side of the braising pan. This area must be kept clear of any objects or obstructions at all times.

Do not operate the lifting system with front doors open (two doors on closed base unit, three doors on open base

unit).

Do not leave the braising pan in the "up" position for extended periods (e.g., overnight or during a shutdown period

between cooking times).

Braising Pans with Manual Lift (Standard)

1. The crank for the manual lift system is located on a hook on the inside of the front door. Open the door and lift

out the crank.

2. Close all front doors.

3. There are two pins on one end of the crank. Insert the crank through the hole on the right door so that the two

pins engage in the slots of the speed reducer coupling located behind the door.

4. Turn the crank handle clockwise to lift the braising pan and counterclockwise to lower the braising pan.

5. This lift system is not affected by power failure and can be operated during a power failure.

6. Refer to the MAINTENANCE section of this manual for lubrication and maintenance instructions.

Braising Pans with Automatic Power Lift (Optional)

The automatic lift cannot raise the braising pan unless the lid is fully opened.

The pan lift is controlled by the white rocker switch located in the hole on the right door.

— 14—

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

Sin comentarios

Vulcan-Hart GH30 Especificaciones Pagina 14