Vulcan-Hart 7595 Manual de usuario descargar pdf (Pagina 11)

TESTING (Cont.)

2. Turn the thermostat knob to a medium temperature setting.

3. Allow enough time for temperature to stabilize, or until

several temperature readings are identical.

4. Read thermometer to see if it agrees with dial setting. The

difference between dial setting and thermometer reading

should not be more than 3% of the total temperature range

on the thermostat dial.

5. If difference in reading is more than 3%, recalibrate the

thermostat as follows:

a) Remove thermostat knob.

b) Rotate screw-in stem clockwise to decrease and coun-

terclockwise to increase temperature. 1/4 turn equals 18°,

c) Replace knob, reset medium temperature setting, and

recheck.

FRY TANK REPLACEMENT PROCEDURE

1. Turn thermostat to "OFF". Unplug electric cord on "E"

models.

2. Drain frytank.

3. Lift off basket hanger. Remove baskets and crumb screen.

4. Remove burners.

5. Turn service valve "OFF".

6. Disconnect pilot burner and demount from tank.

7. Remove thermostat bulb and high limit bulb, through fittings

in bottom of frytank.

8. Tank with flue box attached can now be lifted out of unit.

NOTE: Transfer flue box from old tank to new when replacing

tank.

114590-8

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 26 27

Sin comentarios

Vulcan-Hart 7595 Manual de usuario Pagina 11