
– 6 –
DOOR ADJUSTMENT
One door roller is located in the middle of the door on 10 level ovens; two rollers, one at the top and
the other at the bottom, are located on the door of the 20 level oven. The rollers can be adjusted by
loosening the screws above and below the roller. Adjust the roller to the best vertical position and
tighten the screws.
INSTALLATION CODES AND STANDARDS
In the United States, install the oven in accordance with: 1) State and local codes; 2) National Fuel
Gas Code, ANSI-Z223.1, latest edition, available from American Gas Association, 1515 Wilson
Boulevard, Arlington, VA 22209; 3) National Electrical Code, ANSI/NFPA No. 70, latest edition; and
4) NFPA Standard #96,
Vapor Removal from Cooking Equipment
, latest edition, available from the
National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.
In Canada, install the oven in accordance with: 1) Local codes; 2) CAN/CGA-B149.1, Installation for
Natural Gas Burning Appliances and Equipment, latest edition; 3) CAN/CGA-B149.2, Installation for
Propane Burning Appliances and Equipment, latest edition; and, 4) Canadian Electrical Code, Part 1,
CSA Standard C22.1, latest edition.
VENT HOOD
The Combi oven should be located under a suitable exhaust hood to vent steam, smoke, grease laden
vapors, etc. Information on the construction and installation of ventilating hoods may be obtained from
Vapor Removal from Cooking Equipment
, NFPA standard No. 96 (latest edition).
WATER REQUIREMENTS
Proper water quality can improve the taste of the food prepared in the oven, reduce liming in the steam
generator and extend equipment life. Local water conditions vary from one location to another. The
recommended proper water treatment for effective and efficient use of this equipment will also vary
depending on the local water conditions. Ask your municipal water supplier for details about your local
water supply prior to installation.
Recommended Water Parameters are included with the Water Filter shipped with the Combi oven;
follow the recommendations contained in it.
Water supplies vary from one location to another. A local water treatment specialist should be
consulted before installing any steam generating equipment.
Sediment, silica, excess chlorides or other dissolved solids may lead to a recommendation for alternate
form(s) of water treatment. Consult with a water treatment specialist and your Vulcan Sales office for
specific recommendations.
Comentarios a estos manuales