Vulcan-Hart 1ER85D Especificaciones descargar pdf (Pagina 7)

ERBD, ERBDF, ERD, ERDF, ERC, ERCF SERIES ELECTRIC FRYERS

VULCAN-HART F-32959 Rev. B (November 2008)

-7-

 The restraining device should be attached to the cutout on the back panel. See

illustration for location.

 Australia, use only the caster supplied by the manufacturer for the fryer

device. The fryer must be installed using a hose assembly restraining device to

limit the movement of the appliance in accordance with AS1869.

 The fryer must be installed with a connector (not supplied by Vulcan)

complying with the above codes.

 The fryer must be installed with restraining means to guard against

transmission of strain to the connector. See illustration.

 The fryer must be installed with the casters provided.

 If the restraint is ever to be disconnected, turn off electric supply to the fryer.

ELECTRICAL CONNECTION

Electrical and Grounding connections must comply with the National Electrical Code

and/or other local codes.

Disconnect the electrical power supply to the machine and follow lockout / tagout

procedures.

Appliances equipped with a 120V flexible electric supply cord are provided with a three-

prong grounding plug. It is imperative that this plug be connected into a properly

grounded three-prong receptacle. If the receptacle is not the proper grounding type,

contact an electrician. Do not remove the grounding prong from this plug.

1 2 3 4 5 6 7 8 9 10 11 12 ... 26 27

Sin comentarios

Vulcan-Hart 1ER85D Especificaciones Pagina 7