Vulcan-Hart VF90 Especificaciones

FORM 30916 (1-95) (Formerly F-114555 & F-114556)VF SERIES ELECTRIC FRYERSMODELVF1 ML-52913VMF1 ML-52914VF2 ML-52915VMF2 ML-52916VF90 ML-52917VFD9

— 10 —Models VF2/VMF2 and VF2D/VMF2D 1. Turn the fryer off and allow shortening to cool. 2. Slowly remove the baskets to prevent splashing. 3. Open

— 11 — 2. Close the drain valve (Models VF2/VMF2 and VF2D/VMF2D only). 3. Fill the tank with a non-corrosive, grease-dissolving commercial cleaner

— 12 —MAINTENANCEWARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING,CLEANING AND SERVICING THE FRYER.WARNING: SPILLING HOT FRYING

— 2 —Installation, Operation and Care ofMODELS VF1, VMF1, VF2, VMF2, VF1D,VMF1D, VF2D & VMF2DELECTRIC FRYERSSAVE THESE INSTRUCTIONS FOR FUTURE USE

— 3 —INSTALLATIONBefore installing the fryer, verify that the electrical supply agrees with the specifications on the fryerdata plate which is located

— 4 —1. Bring conduit containing the proper supply wire to the fryer.On VF1/VMF1 and VF1D/VMF1D, bring the conduit in through the clearance hole in th

— 5 —OPERATIONWARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING,CLEANING AND SERVICING THE FRYER.CONTROLS — MODELS VF1/VMF1 and VF

— 6 —PL-40538-1Fry/MeltSwitchHeat IndicatorLightHigh Limit LightTemperature ControllerOn Indicator LightPower SwitchPL-40537-1Ball Pull RodFry/MeltSwi

— 7 —1. Push power switch to OFF and allow fryer to cool.2. Remove the fryer basket(s) and support rack (support rack in VF2/VMF2 and VF2D/VMF2D only)

— 8 —FRYINGPlace the ON-OFF switch to the ON position. The red ON indicator light will come on.Turn thermostat or temperature controller to desired t

— 9 —DAILY FILTERINGShortening life will be extended by filtering at least once a day, or more often if conditions warrant.Models VF2/VMF2 and VF2D/VM